New construction roofing in Greenville is best decided before framing, because roof pitch, material weight and ventilation all shape the structure. Architectural shingles run $4–$6 per sq ft installed nationally and standing seam metal $9–$16, according to HomeGuide. Roofers in our network work with custom-home buyers, owner-builders and small builders.
Get a free roof inspection and quote
Your request goes to a local roofer in our network who will contact you about a free inspection and quote. Tell us about the roof once; a licensed and insured, local roofer will contact you within 24 hours.
Roofers Greenville is a free referral service. Roofing work is performed by independent contractors in our network. Submitting the form is free and doesn’t commit you to anything.
What should you decide before framing?
Three decisions are much cheaper on paper than after the trusses are set.
- Pitch: each material has a minimum slope set by its manufacturer. Low-slope sections, such as porches, need a membrane rather than shingles.
- Weight: natural slate and clay or concrete tile are far heavier than shingles or metal, so the framing must be designed for them. See slate and tile roofing.
- Ventilation: plan intake at the soffits and exhaust at the ridge, sized for the attic, so the roof and attic stay dry in Upstate summers.
How does the roofer fit into the builder’s schedule?
The roof is part of “dry-in”, the point where the house is closed against weather so interior work can start. On a typical build:
- Framing and roof decking are completed.
- The roofer installs underlayment, drip edge and flashing to dry the house in.
- The finished roofing goes on, often after other trades finish their roof penetrations.
- Inspections required by the building department are scheduled along the way.
Agree in writing who handles flashing at walls, windows and chimneys, and who installs roof penetrations, so nothing falls between trades.
Which roofing materials suit a new home?
- Architectural shingles: the most common choice; see architectural vs 3-tab shingles.
- Metal: standing seam or metal shingles for a long life; see metal roofing.
- Cedar or synthetic shake: see cedar and synthetic shake.
- Slate or tile: see slate and tile roofing.
Current national prices for each are in our roof cost guide, and lifespans in how long does a roof last in South Carolina.
What about manufacturer warranties on a new home?
Ask for the manufacturer’s warranty to be registered in the homeowner’s name once the house is finished, not the builder’s. Some manufacturers offer extended warranties when the roof is installed as a complete system of their own components; ask the roofer which system and warranty are quoted, and for the paperwork at handover.
Who handles permits and inspections on a new build?
On new construction, the builder or general contractor normally pulls the building permit and schedules inspections with the city or county. Confirm with your builder which inspections cover the roof, and check requirements with the City of Greenville or Greenville County building office for your address.
Replacing a roof on an existing home is a different job; see roof replacement.
How it works with us
- Tell us about the roof. Fill in the short form once: the job, your ZIP code and how to reach you.
- A local roofer contacts you. Your request goes to a licensed and insured, local roofer in our network, who contacts you within 24 hours to set up a free inspection.
- You get a quote and decide. The inspection and quote are free, with no obligation. Check any roofer against our 5 checks before you sign.
Roofers Greenville is a free referral service. Roofing work is performed by independent contractors in our network. How our referral service works.
Areas we serve
- Greenville County core (within about 20 miles of Greenville): Greenville, Greer, Taylors, Mauldin, Simpsonville, Five Forks, Fountain Inn, Travelers Rest, Easley and Piedmont.
- Rest of the Upstate (about 25–40 miles): Anderson, Belton, Clemson, Seneca, Pickens, Spartanburg, Boiling Springs, Lyman, Moore, Campobello and Woodruff.
Every town, ZIP code and county we cover is on the service areas page.
Frequently asked questions
When should I choose the roofing material for a new home?
Before the framing plans are final. Pitch, structural load and ventilation all depend on the material, and changing them later costs far more.
Can the roofer work directly for me as an owner-builder?
Yes. Owner-builders hire trades directly. Agree the scope, schedule, flashing responsibilities and payment stages in writing, and check the roofer’s SC LLR registration first.
Should a new roof have ridge vents?
Ridge vents are a common way to exhaust attic air, paired with soffit intake. The right design depends on the roof shape and attic; ask the roofer and your designer to size it.
Building a new home? Request a new construction roofing quote.
Sources
- HomeGuide: Roof replacement cost (Nov 2025)
- HomeGuide: Metal roof cost (Nov 2025)
Last reviewed: October 2026. Roofers Greenville is a free referral service; roofing work is performed by independent contractors in our network.